The Conference Program

Plenary meeting

(Large conference hall)
Chairman:
Yu.М. Mikhailov – Academician of RAS, chairman of the Scientific and Technical Council under the Military-Industrial Commission of the Russian Federation – vice-chairman of the Board of the Military-Industrial Commission of the Russian Federation

Vice-chairman:
E.N. Kablov – Academician of RAS, Director General of FSUE «VIAM» SRC RF

09:00–10:00	*Registration*
10:00–10:15	Opening of the conference. Welcoming speech Academician of RAS, Prof., Dr. of Sc. (Chem.) Yuri М*. Mikhailov* Scientific and Technical Council under the Military-Industrial Commission of the Russian Federation
10:15–10:30	Welcoming speech *Sergey V. Salikhov* (Ministry of Education and Since of the Russian Federation)
10:30–10:45	Metal powder compositions and additive technologies for synthesis of complex-shaped components of gas turbine engines Academician of RAS, Prof., Dr. of Sc. (Tech.) *E.N. Kablov* (FSUE «VIAM» SRC RF)
10:45–11:00	Promising applications of additive technologies for biomedicine Academician of RAS, Prof., Dr. of Sc. (Physics & Math.) *Vladislav Ya. Panchenko* (Russian Foundation for Basic Research) Mikhail M. Novikov Institute on Laser and Information Technologies
11:00–11:15	Computer engineering and additive production Corresponding member of RAS, Prof., Dr. of Sc. (Tech.) *Andrei I.Rudsky* Cand. of Sc. (Tech.) Alexey I. Borovikov (Peter the Great Saint-Petersburg Polytechnic University)
11:15–11:30	Scientific support for materials of laser additive technologies Prof., Dr. of Sc. (Tech.) Alexey V. Dub («Rosatom» state corporation)
11:30–11:45	Progress of laser metal additive manufacturing in BAMTRI Dr. of Sc. (Chem.) Huaixue Li (AVIC Beijing Aeronautical Manufacturing Technology Research Institute (BAMTRI))
11:45–13:00	*Lunch*

Section №1
«Physical and mathematical researches, development of metal powder materials and experience on application of additive technologies in industry»
(Large conference hall)

Head of section:
Cand. of Sc. (Tech.) Olga G. Ospennikova – Head of scientific-research bureau «Heat-resistant cast and wrought alloys and steels, protective coatings for GTE
components» FSUE «VIAM» SRC RF

Academic secretary:
Cand. of Sc. (Tech.) Alexander G. Evgenov – Head of laboratory «Powder metallurgy and additive production»
FSUE «VIAM» SRC RF

13:00–13:10	Prospects of application of additive technologies in propulsion engineering Cand. of Sc. (Tech.) Olga G. Ospennikova (FSUE «VIAM» SRC RF)
13:10–13:20	Experience on application of additive technologies at Aviadvigatel OJSC *Alexander G. Aksyonov* (Aviadvigatel OJSC)
13:20–13:30	Application of LMD technology for repair of GTE components at Aviadvigatel OJSC *Alexander S. Ermolaev* (Aviadvigatel OJSC)
13:30–13:40	Additive technologies in production of structural and functional ceramics Dr. of Sc. (Physics & Math.), prof. Sergey N. Kulkov (Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences (ISPMS SB RAS)/National Research Tomsk State University, TSU)
13:40–13:50	Experience on application of domestic powder materials for additive processes at OJSC «Kompozit» Cand. of Sc. (Tech.) Alla I. Logachyova (OJSC «Kompozit»)
13:50–14:00	Additive technologies: application in medicine *Aleksey G. Merkushev* (Ural Federal University (UrFU))
14:00–14:10	Simulation of controllable synthesis of multiphase materials Dr. of Sc. (Physics & Math.), prof. Anna G. Knyazeva (Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences (ISPMS SB RAS), Tomsk Polytechnic University (TPU))
14:10–14:20	Computerized models of state diagrams to design materials for additive technologies *Vasiliy I. Lutsyk* (IFM SO RAN)
14:20–14:30	Correlation between structural defects of Ni-based superalloy produced by selective laser sintering, strategy and conditions of scanning Cand. of Sc. (Tech.) Elena B. Chabina (FSUE «VIAM» SRC RF)
14:30–14:40	Laser-ultrasonic structuroscopy of additive technologies Dr. of Sc. (Physics & Math.) Alexander A. Karabutov (OJSC «SoftEngineering»)
14:40–14:50	Application of additive technologies at Ufa Engine Industrial Association *Vitaly A. Safikanov* (Ufa Engine Industrial Association)
14:50–15:00	Selective laser sintering of unshrinkable ceramic-metal powders – an effective process for production of parts and components of advanced GTE Acad. Academy of Eng. Sc. of RF Anatoly V. Sudarev (OJSC «Research center «A.M. Boyko ceramic engines»)
15:00–15:10	Control of grain-size composition of corrosion-resistant steel powders *Anastasiya A. Philatova* (Moscow State University of Technology «STANKIN» (MSTU «STANKIN»)
15:10–15:20	Gradient laser synthesis of aluminides in metal matrix of the base material by DMD method Dr. of Sc. (Physics & Math.), prof. Igor V. Shishkovsky (Lebedev Physical Institute of the Russian Academy of Sciences (LPI RAS) Samara branch)
15:20–15:30	Researches of simulation of laser sintering of metallic powders undertaken by ILIT RAS *Maxim D. Khomenko* (Institute on Laser and Information Technologies (ILIT RAS))
15:30–16:00	*Coffee-break*
16:00–16:10	Microstructure produced by laser sintering of metallic powders Dr. of Sc. (Physics & Math.) Anatoly M. Orishich (Khristianovich Institute of theoretical and applied mechanics, Siberian branch of RAS)
16:10–16:20	Studies of applicability of direct laser deposition for production of articles from different materials *Cand. of Sc. (Tech.) Evgeny V. Zemlyakov* (Peter the Great Saint-Petersburg Polytechnic University)
16:20–16:30	«Titanium carbide-metallic binder» composite powders for electron-beam deposition *Dr. of Sc. (Tech.) Gennadiy* A. *Pribytkov* (Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences (ISPMS SB RAS)
16:30–16:40	Application of selective laser sintering for production of cell-structured implants *Polina N. Kilina* (Perm National Research Polytechnic University)
16:40–16:50	Experience on application of additive technology for free surfaced objects Cand. of Sc. (Tech.) Stanislav R. Albukhanov (Samara State Aerospace University)
16:50–17:00	Structure and properties of stainless steels of different grades (316, 420 and 17-4) produced by selective laser sintering of powders *Ivan S. Goncharov* (FSUE «Central Research Institute of Structural materials «PROMETEY»)
17:00–17:10	Separation of laser sintering process conditions at formation of an individual sintered layer of metal powder Cand. of Sc. (Tech.) Alexander A. Saprykin (Yurga Technology Institute of Tomsk Polytechnic University (TPU))
17:10–17:30	*Discussion and decision making*

Section №2
«Development of equipment, non-metallic materials and prospects of development and mastering of additive technologies in different industry branches»
(Blue conference hall)

Head of section:
Cand. of Sc. (Tech.) Vladislav V. Antipov – Head of scientific-research bureau «Titanium, magnesium, beryllium and aluminium alloys»
FSUE «VIAM» SRC RF

Academic secretary:
Svyatoslav V. Nerush – acting as the head of section of laboratory «Powder metallurgy and additive production» FSUE «VIAM» SRC RF

13:00–13:10	«Accelerated» certification of critical PCM structures by application of mathematical methods of simulation and control of their production with the use of advanced manufacturing technologies Prof., Dr. of Sc. (Tech.) Andrey E. Ushakov (Skolkovo Institute of Science and technology)
13:10–13:20	Stankoprom JSC - a system integrator in the development of additive technologies *Sergey I. Vetrov* (Stankoprom JSC)
13:20–13:30	Tasks of FSUE «CSRAAEI» as a Branch State Research Center of Russia in development of additive technologies as applied to national automobile industry Cand. of Sc. (Tech.) Andrey S. Kuznetsov (FSUE «Central Scientific Research Automobile and Automotive Engine Institute» of the Russian Federation (FSUE «CSRAAEI»)
13:30–13:40	Additive technologies for development of small-scale business Cand. of Sc. (Physics & Math.) Alexander D. Fertman (Skolkovo Innovation Center)
13:40–13:50	About application of additive technologies in the digital production process in frame of the product life cycle concept Dr. of Sc. (Tech.), prof. Sergey S. Gavryushin (Bauman Moscow State Technical University)
13:50–14:00	Equipment for laser additive technologies Dr. of Sc. (Tech.) Alexander G. Grigoryanz (Bauman Moscow State Technical University)
14:00–14:10	Scientific-educational center «Modern production technologies» Cand. of Sc. (Tech.) Nikita V. Martyushev (Tomsk Polytechnic University (TPU))
14:10–14:20	Criterion score of efficiency of the layer-by-layer synthesis for design and production of aviation equipment *Vadim V. Smirnov* (Ufa State Aviation Technical University)
14:20–14:30	Automation of preproduction for selective laser sintering of polymer powders in aviation industry Cand. of Sc. (Tech.) *Rushana R. Anamova* (The Moscow Aviation Institute (National Research University))
14:30–14:40	Creation of master-models by layer-by-layer synthesis of photopolymer in foundry engineering *Alexey A. Shumkov* (Perm National Research Polytechnic University)
14:40–14:50	Mechanical properties of ULTEM9085 plastic in case of laying-up on 3-D printer *Dmitry Yu. Konstantinov* (Tactical Missiles Corporation JSC)
14:50–15:00	Potentialities of selective laser sintering method for production of intricate-shaped parts from metal powders Cand. of Sc. (Tech.) Tatiana V. Tarasova (Moscow State University of Technology «STANKIN» (MSTU «STANKIN»)
15:00–15:10	Laser stereolithography: the present state and prospects *Mikhail M. Novikov* (Institute on Laser and Information Technologies)
15:10–15:20	Synergetic theory of laser additive technology Cand. of Sc. (Tech.) Vladimir V. Isakov (FSUE «Gas-Turbine Engineering RPC «Salut»)
15:20–15:30	Inorganic fillers-bearing composite materials based on polylactide-polyamide-6 mixtures *Ekaterina N. Kharlamova* (Moscow State University of Fine Chemical Technologies named after M.V. Lomonosov («MITHT»))
15:30–16:00	*Coffee-break*
16:00–16:10	Development of high-tech polymer material for prototyping and selective laser sintering *Yana A. Kuznetsova* (The Moscow Aviation Institute (National Research University))
16:10–16:20	Technology and project of production of domestic fine-dispersive powders for additive technologies Dr. of Sc. (Physics & Math.), Prof. Sergey P. Bardakhanov (The Bardakhanov company)
16:20–16:30	World experience and trends in application of “Consept Laser” units in additive technology *Oleg A. Gogin* (OJSC «Nissa Digispace»)
16:30–16:40	Application of electron-beam unit 6Е250 for 3D growing of metal products *Grigory V. Semyonov* (OJSC «Research and production complex «Tomsk electronic technologies» (OJSC «RPC TETa»)
16:40–16:50	Application of electron-beam gun with plasma cathode in additive technologies Cand. of Sc. (Tech.) Kseniya A. Kolesnikova (Institute of Strength Physics and Materials Science of the Siberian Branch of the Russian Academy of Sciences (ISPMS SB RAS))
16:50–17:00	Selective laser melting of metal powders: from physical processes to industrial applications Cand. of Sc. (Physics & Math.) .), Prof. Igor Yu. Smurov (Moscow State University of Technology «STANKIN» (MSTU «STANKIN»))
17:00–17:10	Basic problems of process simulation and diagnostics in laser technologies for additive production of bulk metallic products Dr. of Sc. (Physics & Math.)Oleg B. Kovalev (Khristianovich Institute of theoretical and applied mechanics, Siberian branch of RAS)
17:10–17:20	An effect of mechanical activation of copper powder on variation of physical and mechanical properties of products made by SLS method *Egor A. Ibragimov* (Yurga Technology Institute of Tomsk Polytechnic University (TPU))
17:20–17:45	*Discussion and decision making*

Search form

The Conference Program