INSTITUTE OF AVIATION MATERIALS
program
Venue of the Conference:
FSUE «VIAM» SRC RF
17 RADIO STREET, 105005,
MOSCOW, RUSSIA
Plenary meeting
(Large conference hall)
Chairman:
Evgeny N. Kablov – Academician of RAS, Prof., Dr. of Sc. (Tech.)
Director General of FSUE «VIAM» SRC RF
Vice-chairman:
Olga G. Ospennikova – Cand. of Sc. (Tech.), the First Deputy of
Director General of FSUE «VIAM» SRC RF
|
09:00–10:00 |
Registration of participants
|
|
10:00–10:10 |
Opening of the conference. Welcoming speech
Academician of RAS, Professor, Dr. of Sc. (Tech.) (FSUE «VIAM» SRC RF) |
|
10:10–10:15 |
Welcoming speech
Academician of RAS, Professor, Dr. of Sc. (Chem.) (Scientific and Technical Council under the Military-Industrial Commission of the Russian Federation) |
|
10:15–10:20 |
Welcoming speech
Cand. of Sc.(Politics) Oleg E. Bocharov |
|
10:20–10:25 |
Welcoming speech
Valentin A. Gapanovich (JSC «Russian Railways») |
|
10:25–10:30 |
Welcoming speech
Academician of RAS, Professor, Dr. of Sc. (Physics & Math.) Vladislav Ya. Panchenko |
|
10:30–10:35 |
Welcoming speech
Dr. of Sc. (Tech.) Andrei I. Grigoriev |
|
10:35–11:00 |
«Additive Technology: the Present and the Future»
Academician of RAS, Professor, Dr. of Sc. (Tech.) (FSUE «VIAM» SRC RF) |
|
11:00–11:20 |
Development of additive technologies in JSC «UEC»
Dmitry V. Karelin (JSC «United Engine Corporation») |
|
11:20–11:40 |
Additive technologies in JSC «UEC-Aviadvigatel»
Corresponding member of RAS, Professor, Dr. of Sc. (Tech.) (JSC «UEC-Aviadvigatel») A.A. Aksenov |
|
11:40–12:00 |
Additive technologies in projects of the Russian Science Foundation
Academician of RAS, Professor, Dr. of Sc. (Tech.) Leonid A. Vaysberg (Russian Science Foundation) |
|
12:00–12:20 |
Synthesis of titanium alloys by the method of selective laser melting
Academician of RAS, Professor, Dr. of Sc. (Tech.) Andrei I. Rudskoy (Peter the Great St. Petersburg Polytechnic University) A.A. Popovich |
|
12:20–13:30 |
Lunch break. The beginning of work of the stand section |
Section №1
(Large conference hall)
«New materials and technologies processes for additive manufacturing»
Chairmen of the section:
Mikhail M. Bakradze – Cand.of Sc. (Tech.), Head of SRB
«Heat-resistant cast and wrought alloys and steels, protective coatings for GTE
components» FSUE «VIAM» SRC RF
Alexander G. Evgenov – Cand. of Sc. (Tech.), leading research worker
FSUE «VIAM» SRC RF
|
13:30–13:45 |
Changes in structure, phase composition and mechanical properties of VZh159, obtained by the method of selective laser melting during barothermal treatment and prolonged annealing
Cand. of Sc. (Tech.) Alexander G. Evgenov (FSUE «VIAM» SRC RF), I.S. Mazalov, D.V. Zaytsev, S.M. Prager |
|
13:45–14:00 |
Application of protective coating using the method of plasma spraying of metallic powders on products made from titanium alloy VT-6, obtained by selective laser melting
Dr. of Sc. (Physics & Math.) Boris R.Gelchinski («Institute of Metallurgy» Ural Branch of RAS), Cand. of Sc. (Tech.) S.A. Ilinykh , A.G. Merkushev, Cand. of Sc. (Chem.) A.V. Dolmatov, Cand. of Sc. (Physics & Math.)V.A. Krashaninin, Cand. of Sc. (Chem.) S.V. Zhydovinova, Cand. of Sc. (Tech.) E.V. Dyuldina, M.N. Zakharov, O.V. Romanova |
|
14:00–14:15 |
Structural study of alloy ZhS32, obtained by the method of selective laser melting after high temperature mechanical tests
Anton N. Raevskikh (FSUE «VIAM» SRC RF), N.V. Petrushin, E.B. Chabina |
|
14:15–14:30 |
Scientific and technological foundations of synthesis of metal-ceramic composite materials and their application in additive manufacturing
Cand. of Sc. (Tech.) Vladimir V. Promakhov («National Research Tomsk State University»), Dr. of Sc. (Tech.) M.Kh. Ziatdinov, Dr. of Sc. (Physics & Math.) A.S. Zhukov, Cand. of Sc. (Tech.) I.А. Zhukov, Cand. of Sc. (Tech.) О.G. Klimova-Korsmik, R.S. Korsmik |
|
14:30–14:45 |
Features of structures and materials properties of heat-resistant intermetallic nickel alloy, obtained by the method of selective laser melting Cand. of Sc. (Tech.)Dmitry I. Sykhov (FSUE «VIAM» SRC RF), О.А. Bazyleva, S.V. Nerush, Cand. of Sc. (Tech.) E.G. Arginbaeva |
|
14:45–15:00 |
Laser welding of billets produced by additive technologies
Cand. of Sc. (Tech.) Sergey V. Kuryntsev (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), А.Е. Morushkin, Dr. of Sc.(Physics & Math.) А.Kh. Gilmutdinov |
|
15:00–15:15 |
Features of three-dimensional printing of polymer composite materials with continuous aramid fiber reinforcement
Maksim G. Krinitsyn (Tomsk Polytechnic University (TPU)), Yu. V. Dontsov, V.A. Yurkina |
|
15:15–15:30 |
Energy-absorbing properties of honeycomb structures with different wall thickness, produced by the method of selective laser melting
Dr. of Sc. (Tech.) Pavel A. Kuznetsov (FSUE «Central Research Institute of Structural materials «PROMETEY» named after I.V. Gorynin NRC «Kurchatov Institute») |
|
15:30–16:00 |
Coffee-break
|
|
16:00–16:15 |
Polymer and composite materials for implantable systems of artificial circulatory support
Professor, Dr. of Sc. (Math.) Evgeny V. Kolpakov (Russian scientific center of surgery named after B.V. Petrovsky), Academician of RAS Yu. V. Belov, Professor, Dr. of Sc. (Tech.) K.L. Kovalev |
|
16:15–16:30 |
The features of the contamination of the recycled powder material in the selective laser melting process depending on parameters of exposed cross-section Sergey V. Shurtakov (FSUE «VIAM» SRC RF), Cand. of Sc. (Tech.) А.G. Evgenov, R. Yu. Malinin, S.M. Prager |
|
16:30–16:45 |
New aluminum alloys for additive technologies
Daria K. Daubarayte (LLC «ILMiT»), I. A. Boyarintsev |
|
16:45–17:00 |
Possibility for developing especially heat-resistant alloys on the base of eutectic in Nb–Nb2C system
Corresponding member of RAS, Professor, Dr. of Sc. (Tech.) Mikhail I. Karpov («Institute of Solid State Physics» RAS), Cand. of Sc. (Tech.) D.V. Prokhorov, Dr. of Sc. (Tech.) T.S. Stroganova, Dr. of Sc. (Tech.) B.A. Gnesin, I.L. Svetlov |
|
17:00–17:15 |
Computer modeling of the processes for production of details from metals by the method of 3D-printing on macro- and meso-levels using Simufact Additive
Eduard Yu. Knyazev (LLC «MSC Software RUS») |
|
17:15–17:30 |
Spheroidizing particles of metal powders in plasma and their application for producing articles by HIP and SLM
Cand. of Sc. (Tech.) Andrey V. Samokhin («Institute of Metallurgy and Materials Science named after A.A. Baykov» RAS), А.А. Fadeev, Cand. of Sc. (Tech.) N.V. Alekseev, М.А. Sinaisky, Cand. of Sc. (Tech.) V. Sch. Sufiyarov, Yu.Yu. Kaplansky |
|
17:30–18:00 |
Discussion and decision making
|
Section №2
(Blue conference hall)
«Equipment, software and control methods.
Computer modelling»
Chairmen of the section:
Pavel B. Mazalov – Head of laboratory “Metal powder compositions and additive technologies for synthesis of details and structural elements» FSUE «VIAM» SRC RF
Maksim A. Yurkov – Cand. of Sc. (Tech.), Deputy Head of laboratory “Metal powder compositions and additive technologies for synthesis of details and structural elements» FSUE «VIAM» SRC RF
|
13:30–13:45 |
Prospects for development of direct laser growing in different branches of industry
Dr. of Sc. (Tech.) Gleb A. Turichin ( «Saint-Petersburg State Marine Technical University») |
|
13:45–14:00 |
Modern equipment for production of spherical powder from metals by inert gas spraying
Nikita A. Chebykin (LLC «ALD Vacuum technologies») |
|
14:00–14:15 |
Application of X-ray computer tomography for non-destructive examination in additive manufacturing
Roman B. Yuferev (LLC «Melytec») |
|
14:15–14:30 |
Modernization of units for laser stereolithography of LC series in ILIT RAS
Sergey V. Kamaev (Institute on Laser and Information Technologies» RAS – branch «Crystallography и photonics фотоника»), М.М. Novikov, S.V. Kozlov |
|
14:30–14:45 |
Optimization of constructions and development of technological process of 3D-printing – DASSAULT SYSTEMES solutions for additive manufacturing
Natalia A. Demkovich (LLC «Bee Pitron») |
|
14:45–15:00 |
Prospective methods of digital design for additive manufacturing
Pavel B. Mazalov (FSUE «VIAM» SRC RF) |
|
15:00–15:15 |
Numerical modelling of the printing process by laser sintering
Denis V. Kondratiev (CJSC «CADFEM-CIS») |
|
15:15–15:30 |
Residual stress and distortion prediction accuracy for additive manufacturing modeling
Cand. of Sc. (Tech.) Ksenia I. Troyanova (LLC « MECAS ESI s.r.o.») |
|
15:30–16:00 |
Coffee-break |
|
16:00–16:15 |
Influence of parameters of selective laser melting on structure and mechanical properties of the synthesized aluminum alloy of Al–Si–Mg system Nikolay V. Dynin (FSUE «VIAM» SRC RF), D.M. Khasikov |
|
16:15–16:30 |
Additive manufacturing of ceramic components by the method of DLP according to the technology of ADMATEC company
Gennady S. Pobirokhin (LLC «ROSNA Engineering NT ») |
|
16:30–16:45 |
Geometric control of articles produced by additive manufacturing using 3D-scanners
Igor E. Krymski (LLC «Cybernetics and automation») |
|
16:45–17:15 |
Discussion and decision making
|
Section № 3
(Hall-presidium)
«Experience of development and application of additive technologies»
Chairmen of the section:
Alexey V. Dub – Prof., Dr. of Sc. (Tech.), the First Deputy of Director General of JSC «Science and innovations» (State Corporation «Rosatom»),
Director General of JSC «Rusatom – Additive technologies»
Svyatoslav V. Nerush – Head of laboratory «Powder metallurgy and additive manufacturing» FSUE «VIAM» SRC RF
|
13:30–13:45 |
Role and place of State Corporation «Rosatom» in the implementation of the roadmap for development of additive technologies
Dr. of Sc. (Tech.) Alexey V. Dub (JSC «Science and innovations» (State Corporation «Rosatom») |
|
13:45–14:00 |
Industrial technologies of atomization of FSUE «VIAM» for production of metal powder compositions (MPC) based on Ni, Co, Fe, Al и Ti alloys
Svyatoslav V. Nerush (FSUE «VIAM» SRC RF) |
|
14:00–14:15 |
Experience in the use of additive technologies in the design of the electronics housing of the strapdown systems of unmanned aircraft systems Petr A. Shapovalov (JSC «Central Scientific-Research Institute of Automation and Hydraulics») |
|
14:15–14:30 |
Repair of GTE details by the method of laser powder welding LMD
Aleksey I. Kyrchev (JSC «UEC-Aviadvigatel»), А.М. Ivanov, Е.N. Fursenko |
|
14:30–14:45 |
Development of additive processes of manufacturing flame tube gtd from heat-resistant powder vv751p Anton V. Sotov («Samara National Research University named after S.P. Korolev » (Samara University)), Cand. of Sc. (Tech.) V.G. Smelov, А.V. Agapovichev, I.О. Zaytsev |
|
14:45–15:00 |
Development, certification and application of domestic heat-resistant alloys in the production of GTE combustion chamber with high power
Nikita V. Fedorov (PJSC «UEC-Saturn») |
|
15:00–15:15 |
Application of additive technologies when reconstructing defects of mandibular bone by composite biomaterials
Svetlana A. Cherebylo (Institute on Laser and Information Technologies» RAS) |
|
15:15–15:30 |
Application of stereolithography models when reconstructing vast defects of skull vault
Vyacheslav V. Vnuk (Institute on Laser and Information Technologies» RAS) |
|
15:30–16:00 |
Coffee-break
|
|
16:00–16:15 |
Laser additive technologies for growing of GTE details
Cand. of Sc. (Tech.) Vladimir V. Isakov (Baranov Central Institute of Aviation Motor Development), Dr. of Sc. (Tech.) L.A. MagerramovaЛ.А., Dr. of Sc. (Tech.) I.А. Burlakov, D.M. Zabel`yan, P.V. Makarov, А.I. Afonin |
|
16:15–16:30 |
Construction of digital biomodels for additive manufacturing based on data of helix CT machine
Mikhail M. Novikov (Institute on Laser and Information Technologies» RAS – branch «Crystallography и photonics ») |
|
16:30–16:45 |
Application of selective electron beam melting technologies for producing individual inactive surgical implant
Anastasiya A. Filatova (Moscow State Technological University «Stankin»), Cand. of Sc. (Tech.) Т.V. Tarasov |
|
16:45–17:00 |
Prospective developments of SPE «Laser systems» in the field of additive technologies: advanced domestic unit of selective laser melting
Sergey S. Smolentsev (LLC «SPE «Laser systems»), Cand. of Sc. (Tech.) D.N. Vasiliev, D.V. Biryukov, V.А. Timofeev |
|
17:00–17:15 |
New additive technologies of the company XJET to print by using ceramic and metallic nanomaterials
Cand. of Sc. (Physics & Math.) Denis S. Podsoblyaev (LLC «Engineering company AB Universal ») |
|
17:15–17:45 |
Discussion and decision making
|
Stand section
(Foyer of Large conference hall)
12:20–18:00
|
|
Research of microstructure and properties of thermoplastic polymer powder compositions for selective laser melting
Sergey A. Larionov (FSUE «VIAM» SRC RF), B.S. Kirin, А.Е. Sorokin, S.L. Lonsky, E.V. Kurshev, N.A. Khodyrev, Yu. V. Chudosay |
|
|
Suspensions on the basis of zirconium oxide in acrylic monomers for 3D printing Cand. of Sc. (Chem.) Petr S. Sokolov (NRC «Kurchatov Institute» – IREA), Cand. of Sc. (Chem.) D. A. Komissarenko, Cand. of Sc. (Chem.) G. A. Dosovitskiy, I. A. Shmeleva, Cand. of Sc. (Chem.) I. V. Slyusar; A.E. Dosovitskiy |
|
|
The computational determination of compression diagrams of the lattice structures synthesized by selective laser melting
Dmitriy V. Grinevich (FSUE «VIAM» SRC RF), N.O. Yakovlev, P.B. Mazalov |
|
|
Advantages of additive technologies as an alternative to traditional technologies
Denis A. Klimov (Baranov Central Institute of Aviation Motor Development), Cand. of Sc. (Tech.) V.E. Nizovtsev , M.I. Stupenkov, Е.N. Bredikhina |
|
|
X-ray non-destructive testing of Metal Additive Manufacturing particular qualities Aleksey V. Smirnov (FSUE «VIAM» SRC RF), O.A. Krupnina, E.I. Kosarina |
|
|
Efficiency of application of selective laser melting technologies for producing details of aerodynamic model
Valery V. Zinyaev (FSUE «VIAM» SRC RF), Dr. of Sc. (Tech.) V.D. Vermel, S.M.Balashov |
|
|
4D-printing: prospects and applications
Dr. of Sc. (Physics & Math.) Igor V. Shishkovsky (P.N. Lebedev Physical Institute of the Russian Academy of Sciences) |
|
|
Production of monolithic articles from composite powder «titanium carbide – titanium» by the method of selective electron beam melting
Maksim G. Krinitsyn («Institute of strength physics and materials science» SB RAS), Dr. of Sc. (Tech.) G.A. Pribytkov, Cand. of Sc. (Tech.) E.N. Korosteleva |
|
|
Photocurable resin for laser stereolithography apparatus in IPLIT-4
Mikhail A. Markov (Institute on Laser and Information Technologies RAS) |
|
Selective laser melting of nanostructured composite powder
Roman S. Khmyrov (Moscow State Technological University «Stankin») Cand. of Sc. (Tech.) T.V. Tarasova, Dr. of Sc. (Physics & Math.) А.V. Gusarov |
|
Spheroidizing powder based on nickel in inductively-coupled plasma
Ramis R. Nazarov (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), О.V. Kudimov, Dr. of Sc. (Tech. )K.Yu. Nagulin, |
|
Optimization of plasma-chemical technology for development of powder materials based on zirconium dioxide Ramis R. Nazarov (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), О.V. Kudimov, Dr. of Sc. (Tech.) K. Yu. Nagulin, |
|
Analysis of influence of plasma-chemical treatment on segregation of nickel-based powder
Ramis R. Nazarov (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), О.V. Kudimov, Dr. of Sc. (Tech.) K.Yu. Nagulin, А.I. Noskov, |
|
Optical system of two-dimensional scanner of laser radiation for additive machine Murat R. Gilyazov (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI) |
|
Existing solutions of industrial laser beam marking
Murat R. Gilyazov (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI) |
|
Modeling of dynamics, structural mechanics and heat exchange of particles of powder for additive laser technologies
Bulat A. Khamidullin (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), Sh.R. Mansurov, L.R. Rakhimova, D.S. Romanov, Cand. of Sc. (Tech.) I.V. Tsivilsky |
|
Laser-acoustical method of additive manufacturing stamps
Aleksey V. Ponikarov (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), А.I. Gorunov, А.V. Ponikarov, А.М. Romanova, А.R. Gaysina, Dr. of Sc. (Physics & Math.) A. Kh. Gilmutdinov |
|
Prospects for the application of the laser-acoustic method of additive production for aluminum alloys
Aygul R. Gaysina (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), А.I. Gorunov, А.R. Mukhametov, Dr. of Sc. (Physics & Math.) A. Kh. Gilmutdinov |
|
Synthesis of titanium alloys by the method of selective laser melting
Igor A. Polozov (Peter the Great Saint-Petersburg Polytechnic University) Dr. of Sc. (Tech.) А.А. Popovich, Cand. of Sc. (Tech.) V.Sh. Sufiyarov, А.V. Grigoriev |
|
Study of influence of ultrasound on formation of coatings from tin bronze under the process of laser melting
Ildar I. Izmailov (Kazan National Research Technical University named after A.N. Tupolev –KAI (KNRTU-KAI), |
|
Equipment for growing articles by laser additive methods from metallic powders
Dmitry S. Kolchanov (Bauman Moscow State Technical University) |
|
Prospects for applying additive technologies for manufacturing details and assemblies from ceramic composite materials
Cand. of Sc. (Tech.) Vladimir E. Nizovtsev (Baranov Central Institute of Aviation Motor Development), D.A. Klimov, M.I. Stupen`kov, Е.N. Bredikhina, А.D. Bortnikov |
|
Production of materials based on silicon nitride by the method of selective laser melting
Ilia G. Mikhailov (OPRE «Technologiya» named after A.G. Romashin» SRC RF), V. S. Zaytsev |
|
Numerical study of effect of capillary and thermocapillary actions in process of laser welding on microstructure of obtained layers
Maksim D. Khomenko (Institute on Laser and Information Technologies RAS), Dr. of Sc. (Physics & Math.) F. Kh. Mirzade |
|
3D-printer with programmable thermostatic chamber for work with high-temperature and special technical polymers
Sergey I. Blaginin (Volgograd State Technical University (VSTU) (branch – Volzhsky Polythechnical Institute)), Cand. of Sc. (Tech.) A.V. Sinkov, Е.P. Boytsov |
|
Spectrometry of laser-induced plasma for composition analysis of articles in the process of coaxial laser welding
Pavel A. Sdvizhensky (National University of Science and Technology «MISiS»), V.N. Lednev, R.S. Tretyakov, R.D. Asyutin, М.Ya. Grishin, S.М. Pershin |
|
Investigation of structure and mechanical properties of samples received with the use of selective laser alloy technology from metal titanium powder brand vt6
Anton V. Agapovichev («Samara National Research University named after S.P. Korolev » (Samara University)), Cand. of Sc. (Tech.) V.G. Smelov, Cand. of Sc. (Tech.) А.V. Sotov |
|
Development of quality management system of selective laser melting of domestic powder compositions Victoria V. Kokareva ((«Samara National Research University named after S.P. Korolev » (Samara University)), Cand. of Sc. (Tech.) V.G. Smelov, Cand. of Sc. (Tech.) А.V. Sotov, Cand. of Sc. (Tech.) L.А. Antipchenko, А.V. Agapovichev, I.О. Zaitsev |
|
Research of processes and articles of additive manufacturing
Aleksey V. Orlov (Peter the Great Saint-Petersburg Polytechnic University), Dr. of Sc. (Tech.) А.А. Popovich, Cand. of Sc. (Tech.) V.Sh. Sufiyarov, D.V.Masaylo, Е.V. Borisov, I.А. Polozov |
|
Additive technologies for manufacturing articles by direct gas-powder laser growing
Dmitry V. Masaylo Peter the Great Saint-Petersburg Polytechnic University), Dr. of Sc. (Tech.) А.А. Popovich, Cand. of Sc. (Tech.) V.Sh. Sufiyarov, А.V. Orlov, Е.V. Borisov, I.А. Polozov |
|
Design and production articles with the specified structure by selective laser melting
Evgeny V. Borisov Peter the Great Saint-Petersburg Polytechnic University), Professor, Dr. of Sc. (Tech.) А.А. Popovich, Cand. of Sc. (Tech.) V.Sh. Sufiyarov, I.А. Polozov, D. V. Masaylo, А.V. Orlov |
|
Technological defects of details produced by the methods of 3D-printing: causes of occurrence and prevention methods
Iliya S. Nefelov (Moscow Automobile and Road Construction State Technical University (MADI)) |
|
Neutron diagnostic of materials and articles obtained by additive technologies on the reactor IR-8 of NRC «Kurchatov Institute»
Professor,Dr. of Sc. (Physics & Math.) Vyacheslav T. Em (FSUE «Central Research Institute of Structural materials «PROMETEY» named after I.V. Gorynin (NRC «Kurchatov Institute»)) V.P. Glazkov, I.D. Karpov, M.M. Murashov, S.V. Nerush, P.B. Mazalov, Е.А. Sul`yanova |
|
Modern numerical models and program products in additive manufacturing
Cand. of Sc. (Physics & Math.) Mikhail D. Krivilev (Udmurt State University), G.А. Gordeev, Cand. of Sc. (Physics & Math.) V.Е. Ankudinov, Dr. of Sc. (Tech.) Е.V. Kharanzhaevsky |
|
Development of UV-curable polymer materials for use in additive technologies Разработка
Cand. of Sc. (Chem.) Zyakiya S. Khamidulova ( NII «polymers»), О.А. Sineokova, N.V. Zaitova, Cand. of Sc. (Chem.) А.F. Murokh, Cand. of Sc. (Chem.) V.P. Lukonin |
|
Theoretical research of formation features of nanoobjects according to technologies of laser nanostereolithography
Cand. of Sc. (Physics & Math.) Anatoly N. Nikitin (Institute on Laser and Information Technologies RAS) |
|
Digital technology and equipment for additive manufacturing of volumetric products from non-ferrous alloys based on neural network control by the process of arc layer-by-layer formation
Aleksey S. Maystro (Peter the Great Saint-Petersburg Polytechnic University), Dr. of Sc. (Tech.) S.G. Parshin |
|
Computer modelling of additive manufacturing processes in programs of MSC company
Cand. of Sc. (Tech.) Mikhail A. Petrov (Moscow Polytechnic University), P.А. Petrov |
|
Experience in the use of methods and software products of topological optimization in the design of aerospace brackets manufactured by additive technologies
Cand. of Sc. (Tech.) Evgeny I. Kurkin («Samara National Research University named after S.P. Korolev » (Samara University), М.О. Spirina, R.D. Azizov |